Warehouse Security Installation in Toronto & the GTA

What We Install in Warehouses

4K & AI-Powered CCTV Cameras

Bullet cameras down racking aisles for long-range visibility, dome and turret cameras at intersections and pick areas, PTZ for active monitoring of large open zones, and license plate recognition (LPR) at every truck entry. We use Hikvision, Dahua, Uniview, Axis, and Hanwha — chosen per zone, not bundled as one-size-fits-all. AI cameras with object detection flag forklift incidents, after-hours motion, and unauthorized vehicles in real time instead of after the fact.

Loading Dock & Perimeter Surveillance

Loading docks are the highest-risk area in any warehouse — industry data shows 68% of theft happens at receiving and shipping. We install elevated overview cameras for full dock visibility plus ground-level cameras for license plates, seal numbers, and personnel ID. Perimeter cameras get IP66/67 weather ratings, IK10 vandal-resistant housings, built-in heaters for Ontario winters, and wide-dynamic-range sensors so they capture detail in both bright outdoor sun and shadowed interior dock zones.

Commercial Access Control

Card and fob readers at every man-door, mag locks or electric strikes on dock-side doors, mobile credentials for management, and biometric readers for restricted zones (server rooms, cage storage, executive offices). Cloud platforms like Brivo, Avigilon Alta, and Kantech let your facilities manager onboard a new hire from their phone, revoke a contractor in seconds, and pull an audit log when something goes missing. We also integrate dock door sensors so you can see which bay door is open, when, and by whom.

ULC-Monitored Intrusion Alarms

Most Ontario commercial insurance policies require ULC-S561 certified monitoring — without it you can lose coverage or pay much higher premiums. We install alarm systems that meet this standard: motion sensors, glass-break detectors, door contacts, panic buttons, and 24/7 monitoring from a ULC-listed central station. Alarms tie into the camera and access control system so a triggered sensor immediately surfaces the relevant video clip and door log.

Yard, Gate & LPR Systems

For fenced yards, drive-through bays, and trailer parking, we install gate access control with LPR or RFID — trucks get pre-authorized, gates open automatically, and every plate gets logged. Combine with thermal perimeter cameras and you have a complete record of every vehicle and every person on the property, day or night, summer or winter.

Network Cabling & Server Room

None of this works without proper cabling. We run Cat6 or Cat6a to every camera and reader, fiber backbone between buildings if needed, and Fluke-certified terminations so you have documentation when something fails. We also build out the IDF/server room — racks, switches, PoE injectors, NVR mounting, UPS backup. One trade for the whole job, no finger-pointing between contractors when something does not work.

Where We Place Cameras

A warehouse camera plan is not just “how many” — it is “where” and “what type.” Every site survey produces a coverage map for these zones:

Loading Docks (Highest Priority)

Elevated overview cameras for full dock visibility, ground-level identification cameras at each bay door, and LPR cameras to capture every truck plate before it backs in. Wide-dynamic-range sensors handle the worst lighting in the building — bright outdoor sun behind a dark interior dock. Cabling stays above 14 feet to avoid forklift damage.

Perimeter & Property Line

Cameras at regular intervals along the fence, with extra coverage at corners and gates (the most-attacked points). Outdoor IP66/67 housings, IK10 vandal rating, infrared night vision, and built-in heaters for winter. Thermal cameras for high-value sites where you need detection in zero light.

Racking Aisles & Pick Zones

Bullet cameras at the ends of each aisle for long-range visibility down the row. Dome cameras at intersections for 360 coverage. Wide-angle coverage of pick-and-pack stations where inventory changes hands — these are the moments where shrinkage happens, and they are also where audit trails matter most.

Receiving, Staging & Shipping

Every transfer point gets dedicated camera coverage: receiving zone (verifying inbound counts), staging (between receive and putaway), and shipping (verifying outbound loads). When something is missing, you can pull video at every step instead of guessing where it disappeared.

Parking, Yard & Driveways

Vehicle entry/exit cameras with LPR, parking lot coverage for employee and visitor vehicles, driveway cameras for late-night drop-offs and pickups. Combined with yard gate access control, you get a complete vehicle log for the property.

Server Room, Office & Cage Storage

Cameras inside the IDF/server room, at the manager office, and inside cage or vault areas where high-value inventory is kept. Biometric access control on those doors so swipe logs match camera footage exactly.

Our Install Process

A 50,000 sq ft warehouse needs more planning than a four-camera home install. Every project follows the same process:

1. Site Survey & Threat Assessment

We walk the entire property — inside and out. Map every dock door, man-door, gate, and blind spot. Review your incident history, insurance requirements, and any compliance needs (ULC, PSISA, Health Canada for cannabis). Identify high-risk zones and figure out where camera coverage actually pays back.

2. System Design & Quote

You get a detailed proposal: camera count, types, placement diagram, access control door schedule, alarm zones, monitoring plan, and cabling layout. Fixed-price quote, no surprise change orders. We explain the trade-offs (4K vs 1080p, AI vs standard, on-prem vs cloud) so you decide based on real information.

3. Cabling & Hardware Install

Cat6 or Cat6a runs to every device, fiber where building-to-building or distance demands it, conduit above forklift reach, Fluke certification on every drop. Camera mounting on poles, eaves, ceiling brackets, and racking columns. Door hardware (electric strikes, mag locks) and reader installs. Alarm panel, sensors, sirens, and ULC monitoring activation.

4. Configuration & Integration

NVR setup with motion zones, retention rules, and remote access. Cloud access control configured with users, schedules, and door groups. Camera-access-alarm integration so events surface together. Mobile app setup for management. Training your facilities team on how to add a user, pull video, and respond to an alarm.

5. Documentation & Ongoing Support

You get a full as-built document: camera diagram, cable schedule, door list, login credentials, and warranty info. We stay reachable for service — new device adds, firmware updates, or troubleshooting. Maintenance plans available with quarterly inspections and priority response for facilities that need uptime guarantees.

Related Services

Commercial Security · CCTV Installation · Access Control · Intercom Systems · Structured Cabling · Fiber Optic · Warehouse Camera Guide (Blog)